The critical nature of projects and operations mandates a cost effective quality assurance program for the purchased materials and equipment.
The Form Inspection Requirements were developed to promote this assurance by condensing the inspection and test particulars of mandatory Engineering Requirements. These forms are used to specify the minimum required quality, certification, and verification for the purchase of all engineering material and equipment. The design of the Form is flexible to allow adding unique requirements. Where this is necessary, prepare a Form "Special", and include in the requisition package.
|
Description
|
|
General template for special inspection form.
|
|
|
|
HIC Testing: API 5L Line Pipe, In-Plant Piping, and Pressure Vessel Steels.
|
|
PIPE: Plain End Electric Resistance or Electric Induction Welded Steel Pipe, 4“ and Above in Nominal Diameter.
|
|
PIPE: High Frequency Welded Line Pipe, Class C, NPS 4 and larger.
|
|
PIPE: Carbon Steel; Seamless or Longitudinal Seam Submerged-Arc Welded; Purchased Small Quantities in accordance with 01-SAMSS-038.
|
|
PIPE: Beveled End, Seamless or Submerged Arc Welded, Straight or Spiral
Seam, Carbon Steel Pipe ≥ 6“.
|
|
PIPE: Beveled End, Seamless, Carbon Steel Pipe < 6”.
|
|
PIPE & FITTINGS: Fiberglass; TRP (Glass-Fiber-Reinforced Thermosetting Resin) & RPMP (Glass-Fiber-Reinforced Plastic-Mortar).
|
|
CONCRETE MORTAR LINING: for Internal Surfaces of Line Pipe and Fittings.
|
|
CONCRETE WEIGHT COATING; For Line Pipe Used Underwater.
|
- PIPE: Fabrication of Spools; Carbon, Alloy, High Strength Special, Low and
High Temperature Steels.
- PIPE BENDS; Shop Formed; Cold Bends, Furnace Hot Bends and Induction Bends.
|
|
TUBES: for Condensers, Tubular Heat-Exchangers, and Similar Heat Transfer
Apparatus, Seamless cold-drawn low-carbon steel; 1/8” to 3” outside diameter.
|
|
TUBES: for Condensers and Heat Exchangers, Externally Helical, Integrally Finned Aluminum-alloy Seamless with finned or un-finned ends, with continuous
fins, or with un-finned sections; up to 2 in. outside diameter.
|
|
CONDENSER TUBES: Seamless tube and ferrule stock of copper and various copper alloys up to 31/8” inch inclusive, in diameter for use in surface condensers, evaporators, and heat exchangers.
|
|
PIPE: Seamless 1” and Larger; and Straight Seam Submerged Arc Welded 16”
and Larger; for Low Temperature Service.
|
|
PIPE: Seamless or Welded; Carbon or Alloy Steel; A312; A335; A376; A430 or A524.
|
|
PIPE: Electric Fusion Welded Austenitic Chromium Nickel Alloy Steel Pipe for
High Temperature Service.
|
|
PIPE: High Temperature, ASTM A-369; A-426; A-451, or A-660.
|
|
PIPING: Auxiliary; For Mechanical Equipment Associated with Compressors,
Pumps, Fans, Turbines and Gears.
|
|
|
|
FLANGES, SPECTACLE PLATES, SPACERS & BLINDS.
|
|
FLANGES: Weld Neck, Forged Steel; for Temperature Ranges From -50C to
+425C; Classes A105; A350 LF2, LF6CL1 & 2; A266 CL2 & 4; A707 L3CL1, 3 &
4, L5 CL3 & 4 and Approved Equivalents; Includes Welding Ends for Swivel Ring and Lapped Joint Flanges.
|
|
PIPE COMPONENTS: Low Temperature Service, Wrought Carbon Steel and
Alloy Steel; Seamless & Welded Construction; Includes elbows, tees, welding outlets, reducers, caps, bosses, couplings, unions, bushings, swaged nipples, pipe nipples, stub ends, blind flanges, spectacle plates, spacers & slip blinds. Sizes ≥¾”.
|
|
JOINTS/SPOOLS: Insulating, for Cathodic Protection.
|
|
FITTINGS: Pipe, Butt Welding; Grade WPB Wrought Carbon Steel & High
Strength Fittings; Seamless or Welded; Suitable for wet, sour service. Excludes
cast fittings, corrosion resistant alloy fittings and pipe bends.
|
|
